Installation of ventilation unit, electrical connection
The power cable is already wired inside the unit and led out of the ventilation unit. The control cable of the RLS 1 WR control unit (alternatively RLS T2 WS) is led into the ventilation unit and wired on the main board of the electronics slide-in module.
Observe the Safety instructions supplement.
When working at heights, use suitable ladders/climbing aids and ensure that they are stable. Work in pairs and make sure that you are standing securely and that no one is underneath the unit.
Risk of injury if the ventilation unit or front cover falls down.
Ensure that the ventilation unit and the front cover are fastened properly. Observe accident prevention requirements.